TSPSC Syllabus 2019 (All Group/Engg/TGT/PGT/PET Exam Pattern PDF)


TSPSC Syllabus

TSPSC Syllabus PDF is published on this web page now. Shortlisted applicants should check complete syllabus and pattern
of All Group/ Engg/ TGT/ PGT/ PET and other written examination here. Shortlisted aspirants may also grab all the details regarding written exam like as date of examination and other from here after reading this content totally. Telangana State Public Service commission announces fresh employment notice time to time to appoint educated and talented aspirants in their department on nil posts. TSPSC is planning to select educated aspirants for the post of TGT, PGT, staff nurse, assistant engineering and other various via this written examination. Total number of vacancies for offered position will be filled by exam qualified and capable aspirants so all the applied job seekers need to present in this written examination with proper preparation.

Dear aspirants if you are also one of them who are looking latest Syllabus and Exam Pattern of All Group/ Engg/ TGT/ PGT/ PET and other then you may grab this better and exact study material from here. Provided data will useful for all capable candidates to get exact knowledge about difficulty level this written examination. If you have whole details about difficulty level of exam then you may make better preparation chart/ plan. If you have desire to get this golden opportunity of government job then best preparation is required for you to obtain merit marks in this recruitment examination. For perfect preparation, applied applicants are required to know overall topics covered under All Group/ Engg/ TGT/ PGT/ PET and other written examination. So, here we are writing well study material entirely for all appearing applicants who are here at present.

Telangana State Public Service commission will operate TGT/ PGT/ staff nurse/ assistant engineering and other examination in upcoming days shortly so applied applicants should check all the details of Latest Syllabus of TSPSC to make perfect preparation for this upcoming examination.

Short Details of www.tspsc.gov.in Syllabus

Name of the Organization – Telangana State Public Service commission

Page Include Information about – Syllabus

Posts Name – TGT/ PGT/ staff nurse/ assistant engineering and other

Date of Exam – Not Updated

Status of Syllabus – Available

Official Website – www.tspsc.gov.in

www.tspsc.gov.in Exam Pattern Full Info

TSPSC Syllabus

TSPSC TGT (Trained Graduate Teacher) Syllabus

Exam Pattern of Preliminary (Screening Test) Examination:
Written Examination (Objective Type)
No. of Questions
Duration (Minutes)
Marks
General Studies
General Abilities
Basic Proficiency in English
150
150
150
Exam Pattern of Main Examination:
Written Examination (Objective Type)
No. of Questions
Duration (Minutes)
Marks
Pedagogy of Concerned
150
150
150
Subject Discipline Knowledge/Concerned Subject
150
150
150
Syllabus
Section-I: General Studies
Current Affairs – Regional, National & International.
Indian Constitution; Indian Political System; Governance and Public Policy.
Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc and inclusive policies.
Society Culture, Civilization Heritage, Arts and Literature of India and Telangana
General Science; India’s Achievements in Science and Technology
Environmental Issues; Disaster Management- Prevention and Mitigation Strategies and Sustainable Development.
Economic and Social Development of India and Telangana.
Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
Section-II: General Abilities
Analytical Abilities: Logical Reasoning and Data Interpretation
Moral Values and Professional Ethics in Education
Teaching Aptitude
Section – III: Basic Proficiency in English
1.) School Level English Grammar:
Articles; Tense; Noun & Pronouns; Adjectives; Adverbs; Verbs; Modals; Subject-Verb Agreement; Non-Finites; reported speech; Degrees of Comparison; Active and Passive Voice; Prepositions; Conjunctions; Conditionals.
2.) Vocabulary:
Synonyms and Antonyms; Phrasal Verbs; Related Pair of Words; Idioms and Phrases; Proverbs.
3.) Words and Sentences:
Use of Words ; Choosing Appropriate words and Words often Confused; Sentence Arrangement, Completion, Fillers and Improvement; Transformation of Sentences ; Comprehension; Punctuation; Spelling Test; Spotting of Errors.
TSPSC AEE Syllabus in Various Engineering Services
The AEE Exam consists of two papers i.e.
Paper I- General Studies and General Abilities
Paper II- Civil Engineering (Degree Level)

Paper I- General Studies and General Abilities
Current affairs – Regional, National and International.
International Affairs.
General Science; India’s Achievements in Science and Technology.
Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
Economic and Social Development of India and Telangana.
Physical, Social and Economic Geography of India.
Physical, Social and Economic Geography and Demography of Telangana.
Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.
Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
Indian Constitution; Indian Political System; Governance and Public Policy.
Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.
Society, Culture, Heritage, Literature of Telangana.
Policies of Telangana State.
Logical Reasoning; Analytical Ability and Data Interpretation.
Basic English. (10th class Standard)

Paper-II: Civil Engineering (Degree Level)
Building Materials And Construction
Bricks– Types of Bricks, Indian standard classification, properties;
Stones – Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying;
Cement – Different grades and types of cement, properties and IS specifications;
Aggregates – coarse and fine aggregate, properties and IS specifications;
Cement Mortar – Proportions of cement mortar for various applications;
Concrete – Constituents of Concrete, Different grades of Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete;
Admixtures– Types of Admixtures
Strength of Materials And Theory of Structures
Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr’s circle of stress, Theory of bending and bending stresses; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending.
Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani’s methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.
RCC and Steel Structures
Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method – Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory.
Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis.
Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.
Fluid Mechanics and Hydraulics
Fluid Properties; Measurement of Pressure – Manometers;
Fluid Kinematics – Classification of Fluids, Stream function and Velocity potential, significance and use of Flownets,
Fluid dynamics – Continuity equation, Bernoulli’s equations and Impulse momentum equation;
Laminar and Turbulent flow through pipes – significance of Reynolds number,
Hagen – Poiseuille’s equation,
Darcy – Weisbach equation, Friction factor, Water hammer phenomenon;
Compressible flow – Bernoulli’s equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels;
Gradually varied flows – significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges;
Boundary layer – Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws;
Hydraulic Turbines – classification, Velocity triangles, principles and design of reaction and impulse turbines;
Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.
Hydrology and Water Resources Engineering
Hydrological cycle;
Rainfall – types and measurement, network design; Infiltration – ะค- index;
Runoff – process, factors and determination of runoff, dependable yield
Floods – flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel’s extreme value methods;
Groundwater – types of aquifer and properties, Darcy’s law, specific yield, steady radial flow to wells in confined and unconfined aquifers;
Irrigation – types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects;
Dams – classification, forces and design of Gravity dam and Earth dam;
Spillways – types, energy dissipation, stilling basin, Appurtenances;
Canals – alignment, Kennedy’s and Lacey’s theories, lining of Canals;
Weirs – components, design of vertical drop and sloping glacis weir;
Seepage forces – Bligh’s Theory, Khosla’s theory;
Canal falls – types and design principles
Cross drainage works – classification and design principles of aqueducts;
Hydropower– classification and principle components of Hydroelectric power plants.
Environmental Engineering
Water Supply – objectives, rate of demand, population forecasts;
Analysis of Water – classification, design of coagulation, sedimentation, filtration, disinfection and softening processes;
Methods of layout of distribution pipes – Hardy cross method;
Waste water engineering – systems of sewerage, hydraulic formula and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal;
Treatment of sewage – principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks;
Municipal solid waste – characteristics, collection and transportation of solid wastes;
Air Pollution – types and sources of pollutants, air quality standards;
Noise pollution – Impacts and permissible limits, measurement and control of noise pollution.
Transportation Engineering
Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient;
Grade compensation;Traffic Surveys – speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000
Intersection – at grade and grade separated; Channelization; Rotary intersection;
signal design – webstar method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts
Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.
Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.
Soil Mechanics and Foundation Engineering
Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability;
Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils; swelling and its preventions; Coffer dams, Caissons, Dewatering, Bracing for excavations, Newmark charts, machine foundations.
Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods; Engineering Geology applications for Tunnels, Dams and Reservoirs; Geological hazards and preventive measures.
Estimation, Costing and Construction Management
Abstract estimate:
Detailed estimate – centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard,
General Specifications – Earth Work, Brick / Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, colour wash; Standard schedule of rates, lead and lift, preparation of lead statement;
Computation of earth work – Mid-ordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule;
Approximate estimate – Plinth area and cubic rate estimate.
Surveying
Principle and classification of surveying, chain surveying; Compass surveying; Levelling and contouring; Theodolite surveying; curves;
Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.
Paper-II: Civil Engineering (Degree Level) Exam Pattern
Examination
No. of Questions
Duration (Minutes)
Maximum Marks
Part: A
Written Examination (Objective Type) Paper-I: General Studies and General Abilities
150
150
150
Paper-II
Civil Engineering (Degree Level)
150
150
300
Part: B
 Interview
50
Total
500
TSPSC PGT (Post Graduate Teacher) Syllabus
Scheme of Preliminary (Screening Test) Examination:
Written Examination (Objective Type)
No. of Questions
Duration (Minutes)
Marks
General Studies, General Abilities and Basic Proficiency in English
150
150
150
Scheme of Main Examination:
Written Examination (Objective Type)
No. of Questions
Duration (Minutes)
Marks
Pedagogy of Concerned
150
150
150
Subject Discipline Knowledge/Concerned Subject
150
150
150
TSPSC Syllabus
Section-I
General Studies
Current Affairs – Regional, National & International
Indian Constitution; Indian Political System; Governance and Public Policy
Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies
Society Culture, Civilization Heritage, Arts and Literature of India and Telangana
General Science; India’s Achievements in Science and Technology
Environmental Issues; Disaster Management- Prevention and Mitigation Strategies and Sustainable Development
Economic and Social Development of India and Telangana
Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state
Section-II
General Abilities
Analytical Abilities: Logical Reasoning and Data Interpretation
Moral Values and Professional Ethics in Education
Teaching Aptitude
Section – III
Basic Proficiency in English
School Level English Grammar
Vocabulary
Words and Sentences
TSPSC Assistant Engineers Syllabus In Various Engineering Subordinate Services
This exam contains two papers which are mentioned below:
Paper-I: General Studies and General Abilities
Paper-II: Civil Engineering (Diploma Level) or Mechanical Engineering (Diploma Level)

Paper-I: General Studies and General Abilities
Sr. no
Topics
1
Current Affairs – Regional, National and International
2
International Relations and Events.
3
General Science; India’s achievements in Science and Technology
4
Environmental issues and Disaster Management
5
Economy of India and Telangana
6
Geography of India with a focus on Telangana
7
Indian Constitution and Polity with a focus on local self Government
8
Society, Culture, Heritage, Arts and Literature of Telangana
9
Policies of Telangana State
10
History of Modern India with a focus on Indian National Movement
11
History of Telangana with special emphasis on Movement for Telangana Statehood
12
Logical Reasoning, Analytical Ability and Data Interpretation
13
Basic English (8th Class Standard)
Paper-II: Civil Engineering (Diploma Level)
Surveying
Fundamental concepts; Classification of Surveys; Chain Surveying; Compass Surveying; Levelling and Contouring; Theodolite Surveying; Tacheometry; Curves;
Introduction and fundamental concepts of electronic measuring instruments – EDM, Total Station, GIS & GPS.
Construction Materials & Practice
Properties and uses of construction materials – Stones, Bricks, Tiles, Sand, Cement, Timber, Plastics, Glass, Asbestos, Paints, Distempers, Enamels and Varnishes; Preparation of Cement mortar for various works.Classification of Buildings as per NBC,
Site investigation for foundation as per NBC -Trial Pit and auger boring, classification of foundations, construction of spread footing and well foundation;
Stone and Brick masonry – types and principles of construction;
Doors and Windows – types, fittings and fastenings, types and functions of Lintels, Sunshades and Roofs,
Flooring – Construction and types of material; Types of Stairs; Scaffolding; Types of Plastering, Pointing, Painting and White / Colour Wash.
Engineering Mechanics and Strength of Materials
Forces – types of Forces, Parallelogram, Triangle and Polygon Law of Forces, Lami’s theorem; Centre of Gravity and Moment of Inertia; Simple stresses and strains,
Hooke’s law – stress strain diagram, working strength, elastic constants, Poisson’s ratio, Relationship between elastic constants, compound rods, temperature stresses, strain energy, proof resilience, impact loading; Shear force and bending moment diagrams for simply supported, over hanging and cantilever beams, relation between intensity of loading, shear force and bending moment; Theory of simple bending, modulus of section, moment of resistance, distribution of shear stress in rectangular, circular and I-Sections; Deflection in cantilever and simply supported beams subjected to simple loading;
Columns and struts – Euler’s and Rankine’s formulae, Slenderness ratio, simple built-up columns; Analysis of dams and retaining walls;
Simple plane and pin– jointed trusses, Stresses by method of joints and method of sections.
Hydraulics
Properties of fluids, fluid pressure and its measurement; Types of flows, energies in fluid motion
Bernoulli’s theorem and its applications – venture metre, pitot tube; Orifice and mouthpiece; Notches and weirs; Flow through pipes, hydraulic gradient line and total energy line,
laminar and turbulent flow in pipes – Reynolds number, measurement of velocity; open channels;
Water turbines – classification, centrifugal and reciprocating pumps; Layout of hydroelectric power plant.
Quantity Surveying
Abstract estimate, detailed estimate – centreline and long & short wall method, various items of Civil Engineering works as per Indian Standards;
General Specifications – earth work, brick / stone masonry in cement mortar, RCC, plastering in cement mortar, Floor finishes with ceramic tiles and marbles, white washing, colour washing; Standard schedule of rates, lead and lift, preparation of lead statement;
Computation of earth work – Midordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule;
Approximate estimate – Plinth area and cubic rate estimate.
Design of Structures (RCC and Steel)
RCC structure: Design philosophies – principles and concepts of working stress method and limit state method, loads and permissible stresses, IS specifications, analysis and design – rectangular beam, slab, T-beam, column, footing and stair case.
Steel Structures: Properties of steel sections, loads and permissible stresses, IS specifications, Analysis and design – welded joints, beam, column, column base, tension member; Design of roof truss.
Irrigation Engineering
Definitions, duty, delta, base period, rainfall and its measurement, factors affecting runoff, methods of computing maximum flood discharge; Classification of head works, component parts of a weir and barrage,
factors influencing selection of site – reservoirs and dams; Classification of canals, canal lining, cross drainage works; Soil erosion, water logging, soil water plant relationship; Necessity of irrigation – advantages and disadvantages, irrigation methods
Environmental Engineering
Basics of ecosystem, water supply scheme; Sources of water;
Conveyance of water – pipes, joints and laying; Testing of water, drinking water standards; Treatment of water; Distribution of water; Water supply connection to a building, Quantity of sewage, surface drains, design of sewers running half full, limiting velocities; Laying of sewers, sewer appurtenances; Collection of sewage samples,
characteristics of domestic and industrial sewage – BOD, COD; Sewage treatment, septic tank & soak pit,
sewage disposal – dilution and sewage farming; House drainage arrangements in buildings;
Solid waste – collection and disposal;
Air Pollution – sources, effects and controlling methods.
Transportation Engineering
Alignment of roads – plain and hilly terrain, surveys; Cross section of road structure, width of pavement, Camber, Gradient, Super elevation, Transition curves, horizontal and vertical alignment; Pavement marking, traffic signs, traffic islands Types of soil,
classification of soil – Textural, IS Classification,
physical properties – plasticity, cohesion, consolidation, compaction, permeability, compressibility, soil moisture content, specific gravity, density; Bearing capacity of soil.
Paper-II: Mechanical Engineering (Diploma Level)
Subject
Topic
Thermal Engineering
Thermodynamics
Heat Engines
Automobile Engineering
Manufacturing Technology
Methods of manufacturing processes:
Metrology
Engineering Mechanics & Strength of Materials
Statics
Dynamics
Strength of Materials
Machine Design
Design factors
Factor of safety
Limits, tolerances and fits
Conventional symbols of Materials and machine components
Welding symbols
Surface roughness values and symbols
Specifications of materials and standard components
Bolts, Nuts and screws
Shafts, keys and couplings
Belt, chain and Gear drives
Cams
Fly wheel
Governors.
Engineering Materials
Mechanical properties of engineering materials
Testing and structure of materials
Production of iron and steel
Iron/carbon equilibrium diagram
Heat treatment of steels
Ferrous and non ferrous metals and their alloys.
Hydraulics and Hydraulics Machinery
Hydraulics
Hydraulics Machines
Industrial Engineering and Management
Management
Industrial Engineering
Paper-II: Civil Engineering (Diploma Level) Exam Pattern
Examination
No.of Questions
Duration (Minutes)
Maximum Marks
Written Examination (Objective Type
Paper-I:General Studies and General Abilities
150
150
150
Paper-II: Civil Engineering ((Diploma Level) OR Mechanical Engineering (Diploma Level)
150
150
150
Total
300
TSPSC Staff Nurse Syllabus
TSPSC Exam Pattern:
Written Examination (Objective Type)
No. of Questions
Duration (Minutes)
Marks
Paper – I
General Studies and General Abilities
150
150
150
Paper-II
Nursing
150
150
150
TSPSC Syllabus
Paper – I
General Studies and General Abilities
Current Affairs – Regional, National & International
Indian Constitution; Indian Political System; Governance and Public Policy
Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc.and inclusive policies
Society Culture, Civilization Heritage, Arts and Literature of India and Telangana
General Science; India’s Achievements in Science and Technology
Environmental Issues; Disaster Management- Prevention and Mitigation Strategies and Sustainable Development
Economic and Social Development of India and Telangana
Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state
Moral Values and Professional Ethics in Education
Analytical Abilities: Logical Reasoning and Data Interpretation
Basic English
Paper – II
Nursing
Anatomy and Physiology
Microbiology
Psychology
Fundamentals of Nursing
First Aid in Emergency situations
Community Health Nursing Process
Normal dietary requirements and Deficiency Diseases
Medical Surgical Nursing Assessment
Medical Surgical Nursing II-
Mental Health and Psychiatric Nursing
Pediatric Nursing (Child Health)
Midwifery and Gynecological Nursing
Community Health Nursing II
Professional Trends and Adjustments
Administration and ward Management

Note: To grab other required details associated to TSPSC syllabus you must open Official Link.

Take a Look on Below Table

Latest Government Jobs Engineering Jobs
10th/12th Pass Jobs Graduate Degree Jobs
Police Jobs in India Latest Employment News
Rojgar Samachar Tips to Download Admit Card
Written Exam Tips Career Management Tips
English Improvement Tips Interview Tips

0 comments:

Post a Comment